Slash by GiGi - Brainstorm Snowboard - ApARTment

LANDING STRIP, PROGRESSIVE SIDECUT: Strips of Kevlar and carbon fiber placed from the inserts to the tips in the nose and tail support landings and reduce washouts. This design also helps dampen high-speed chatter, offer stability at speed and load up potent ollies. Brainstorm's progressive sidecut design blends many radii and smooth contact points for buttery smooth turn initiation, edge-to-edge transition and edge hold.

BACKSEAT CAMROCK, IDENTITY SHAPE: The Backseat CamRock design places rocker in the nose and a slight amount in the tail with positive camber in between. This setback design delivers camber stability and control between the feet and in the tail, with the added float and manoeuvrability of the rockered nose. Our Identity shape saves material and weight and also stands up without tipping over like rounded boards do!

TRI-AX FIBERGLASS, FOREVER WOOD CORE, FACTORY WAXING: Tri-Ax Fiberglass is the time-tested classic. It provides superior pop, consistent torsional flex, and more overall response. Brainstorm is constructed from 4 different lightwood wood species - paulownia, spruce, beech and poplar, which makes the board flyweight, durable, filled with pop and highly reactive. All Slash boards are factory waxed with OneBallJay wax and ready to shred straight out of the wrapper.

SINTERED BASE 6000, STEEL EDGES, BELT FINISH: The Sintered quality base is fast, durable and requires less waxing. Edges are built with 35% more steel content than the average. They are simply stronger and more durable than the alternative. The belt finish gets your base optimized before it’s fully waxed.

IMPACT DAMPENING, TIP PROTECTORS: A vibration dampening rubber used between the steel edge and the sidewall, which absorbs impacts only to a very small degree, its main purpose is to act as an adhesion layer between the edge and sidewall to prevent the possibility of delamination. Thin, light and surprisingly strong aluminum protectors that cap the base and edge at the tip and tail to protect the board from impacts.

How to identify the size of the board that best suits you 

The only way to know for sure is through experience. You just have to try different shapes and lengths until you figure out what is right for you. But everyone has to start somewhere, and there are a few easy guidelines you can follow to get off on the right foot. The first depends on the type of riding you want to do. If you plan on doing mostly freestyle riding, that is, hitting booters, jibs, and pipes, you will want to ride a shorter board. For more of a freeride, that is, first tracks through twelve inches of pow, a slightly longer board is typically suitable.

The rule of thumb is that, if you hold the board on end in front of you, it should come up to somewhere between your chin and the bridge of your nose. If you can find a board about that long, you should be ok to start. More advanced riders can decide if they want to go above or below that range, but at the end of the day, it is a really just a matter of preference. Contact any of our Authorized Dealers for advice, they will help you figure out which board is right for you.

Customers with Bigger Foot

It all depends. With most boots these days being more low profile, and bindings offering toe and heel ramps, you really do not need a wide board unless you are over a size 11.5 boot (U.S.). Typically, wide boards start at a 26.0 cm waist width and go wider as the length goes longer. Again, get fitted properly at your local Authorized Slash Dealer to get more of a custom set up and decide if a wide or standard width board is best for you.